A.wheelhouse control station
B.engine room control station
C.captains office
D.chief engineers office
您可能感興趣的試卷
你可能感興趣的試題
A.a shortened ignition delay period
B.a lean fuel/air mixture
C.excess fuel in the combustion chamber
D.rapid vaporization of injected fuel droplets
A.at any time
B.only after the engine room control station is switched to “bridge control”
C.whenever the secondary station is switched to "bridge control"
D.with the approval of the chief engineer only
A.open the filter and inspect the elements
B.check the lube oil pump discharge pressure
C.check the lube oil header pressure
D.check the pressure drop across the filter
A.Exhaust and scavenging
B.Scavenging and compression
C.Ignition and expansion
D.Exhaust and compression
A.reduce the engine driven fuel pump outlet pressure
B.retard the fuel injector timing to reduce power
C.increase the fuel rack setting
D.reduce the load on the engine
最新試題
When fuel oil has seriously contaminated a diesel engine lubricating oil, you should ().
In using reduction gears to obtain efficient propeller speeds, ().
The minimum speed an engine must attain before ignition can occur depends upon ().
If a diesel engine is difficult to start and operates with the engine temperatures lower than normal, you should suspect that the ().
Diesel engine control can be obtained by the bridge ().
What is the function of the thrust bearing?()
The ability of the governor to prevent fluctuations in engine speed is termed ().
What causes diesel fuel to be ignited in the cylinder of an operating diesel engine?()
White smoke exhausting from an operating diesel engine may indicate ().
An automated diesel engine should normally shut down due to ()