A.viscosity is too low
B.temperature is too low
C.pump discharge pressure is higher than the systems pressure
D.pump capacity is greater than the systems needs
您可能感興趣的試卷
你可能感興趣的試題
A.they must be located at the after end of the engine
B.they can only be used with one engine at a time
C.they eliminate the need for controllable pitch propellers
D.they are connected to the engine with a flexible coupling
A.excessive fuel penetration
B.prolonged injection lag
C.reduced ignition lag
D.prolonged ignition lag
A.control axial movement of the crankshaft
B.transmit engine thrust to the propeller shaft
C.absorb vibrations in the propeller shafting
D.prevent propeller thrust from being transmitted to the hul
A.wheelhouse control station
B.engine room control station
C.captains office
D.chief engineers office
A.a shortened ignition delay period
B.a lean fuel/air mixture
C.excess fuel in the combustion chamber
D.rapid vaporization of injected fuel droplets
最新試題
How many power strokes per crankshaft revolution are there in an eight cylinder, two stroke/cycle diesel engine?()
To determine if the lube oil filter elements need changing, ().
The minimum speed an engine must attain before ignition can occur depends upon ().
Combustion knock occurring in a diesel engine can be caused by ().
What causes diesel fuel to be ignited in the cylinder of an operating diesel engine?()
Control of the main propulsion diesel engines can be shifted from the engine room to the wheelhouse from the ().
Diesel engine control can be obtained by the bridge ().
In a simple mechanical governor, the ().
A diesel engine is operating with excessively high exhaust temperatures at all cylindersTo correct this condition, you should FIRST ().
A thrust bearing is used with a propulsion diesel engine to ().