A.one to supply steam to the main propulsion turbine
B.an auxiliary boiler
C.A and B
D.neither A nor B
您可能感興趣的試卷
你可能感興趣的試題
A.fuel tank
B.bilge
C.atmosphere
D.auxiliary exhaust line
A.ensure feed water flow into the boiler
B.keep the steam drum pressure high
C.prevent water hammer in the feed line
D.help the feed water flash to steam
A.take no measures
B.extinguish the fire as soon as possible
C.feed water to the boiler
D.open the blow down valve
A.feed pump suction line
B.hot well
C.shell of the feed heater
D.feed lines to the boiler
A.rise when the steam pressure is increased
B.remain constant as long as the feed pump operates
C.fall when the steam pressure is decreased
D.vary as the steam demand changes
最新試題
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.
Low compressor head pressure in a refrigeration system can be caused by（）.
A pressure drop through the refrigerant liquid line may cause （）.
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?（）