A.Ball float
B.Thermostatic
C.Bimetallic
D.Impulse
您可能感興趣的試卷
你可能感興趣的試題
A.a gas mask suitable for protection against each refrigerant used, or a self contained breathing apparatus must be provided
B.it is the sole responsibility of the chief engineer to ascertain that all members of the engineering department are familiar with the use of gas masks or breathing apparatus
C.spare charges shall be carried for at least 50% of each size and variety of gas masks and/or self contained breathing apparatus
D.all of the above
A.to inject cleaning additives when the bilges are extremely dirty
B.when the main condenser becomes fouled, in order to provide additional cooling water circulation
C.to connect the rose box to the independent bilge suction
D.if the bilges become flooded and they can not be emptied by any other means
A.frequently grounding out
B.frequently starting and stopping
C.running too fast
D.running too slow
A.completely filled with saltwater
B.filled with de-scaling compound
C.tightly closed to exclude air
D.vented to the atmosphere
A.second stage cylinder lockup
B.oil sump contamination
C.faulty operation of pneumatic valves
D.corrosion of air receiver baffles
最新試題
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by ().
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?()
When the steering gear is in operation, you should ().
One cause of high head pressure occurring in a refrigeration system can be ().
The rate of heat transfer from a hot region to a cold region is affected most by the ().
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will ().
Which of the following statements is correct concerning heat transfer?()