A.fusion
B.vaporization
C.condensation
D.sublimation
您可能感興趣的試卷
你可能感興趣的試題
A.capability of causing brittle fractures
B.highly corrosive action on mild steel
C.vapor cloud which reacts violently with saltwater
D.toxicity at atmospheric pressure
A.passing it through the expansion valve
B.condensing refrigerant in the system condenser
C.passing the gaseous refrigerant through the heat interchanger on the suction side of the compressor
D.maintaining a high pressure on the systems receiver
A.compressor
B.condenser
C.receiver
D.evaporator
A.secure and tag the electrical circuit
B.place a crow bar in the flywheel of the unit
C.inform all persons in the area not to start the unit
D.make a log book entry
A.stuffing box diameter
B.direction of rotation of the screws
C.pitch of the screws
D.type of driving gears
最新試題
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
Which of the listed pumps is NOT a positive displacement pump?（）
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
The major source of chemical contaminants in hydraulic fluid is （）.
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.