A.horizontally mounted
B.never fitted with intake filters
C.fitted with intercoolers
D.operated in an unloaded condition at all times
您可能感興趣的試卷
你可能感興趣的試題
A.High pressure compressors are more efficient than low pressure compressors
B.Mechanical efficiency divided by compressor efficiency will equal the overall efficiency of the compressor unit
C.Two stage compressors are generally more efficient than single stage compressors
D.The volumetric efficiency is decreased in multistage compressors
A.precipitation number
B.neutralization number
C.pour point
D.demulsibility
A.liquid strainer
B.refrigerant inlet of the condenser
C.inlet side of the evaporator
D.suction side of the compressor
A.Centrifugal
B.Gear
C.Propeller
D.Turbine
A.top of the piston and bottom side of head, with the piston at BDC
B.piston and head, including the space around the piston to the top of the upper ring and under the valves, with the piston at TDC
C.bottom of the piston and bottom side of the head at TDC, regardless of upper ring location and valve placement
D.top of the piston and bottom side of the head at TDC as compared to that which exists between the top of the piston and bottom side of head at BDC
最新試題
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is ().
The general purpose of a heat exchanger is to ().
The output volume of a positive fixed displacement pump can be changed only by ().
The control mode in which the final control element is moved from one of two flexed positions to the other is known as ().
A pressure drop through the refrigerant liquid line may cause ().
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will ().
Low compressor head pressure in a refrigeration system can be caused by().
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should ().
An excessive charge of refrigerant in an air-cooled refrigeration system can cause ().
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?()