A.Ash content, carbon residue, and gravity
B.Viscosity, acidity, and demulsibility
C.Pour point, flash, point, and precipitation number
D.Auto-ignition point, viscosity index, and film strength
您可能感興趣的試卷
你可能感興趣的試題
A.Protects against suction valve float
B.Provides a positive pressure on the air inlet valves
C.Prevents lubricating oil contamination of the compressed air supply
D.Protects against the damaging effects of airborne solid particles
A.warm-up allows the hydraulic system to become charged with oil
B.warm-up allows the relief valves to be properly tested
C.hydraulic strainers operate only during the warm-up period
D.hydraulic fluid must be at the proper viscosity
A.are exposed to a vacuum
B.come in contact with extremely hot surfaces
C.are reduced in temperature to just above the pour point
D.become extremely agitated or aerated
A.weight
B.internal friction
C.demulsibility
A.Extensive centrifuging
B.Wax content
C.Water content
D.Acid content
最新試題
One cause of high head pressure occurring in a refrigeration system can be （）.
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.
The output volume of a positive fixed displacement pump can be changed only by （）.
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
Which of the listed pumps is NOT a positive displacement pump?（）
The usual symptoms of cavitation in a centrifugal pump is （）.