A.ignition temperature
B.flash point
C.flammable range
D.convection index
您可能感興趣的試卷
你可能感興趣的試題
A.freeze on the expansion valve seat and reduce the flow of liquid refrigerant
B.emulsify the oil in the condenser
C.freeze in the king valve
D.clog the oil trap
A.The colder seawater passing through the condenser tube bundles of the various stages increases evaporator vacuum
B.The amount of heated feed water discharged from the feed water heater after cndenser is increased
C.Fewer non-condensable gases are created by the flow of colder seawater
D.More seawater is allowed to pass through the flint stage overflow weir
A.bleeding refrigerant from the condenser
B.opening a drain petcock on the oil separator
C.condensing the water in the heat exchanger
D.using a dehydrator cartridge
A.drill holes through the heavy side of the impeller until it balances
B.weld counterweights to the light side of the impeller
C.remove metal from the heavy side by machining in a lathe
D.acid wash and serape the heavy side until it balances
A.cause loss of hydraulic oil from the system
B.result in extreme damage to the pump
C.cause damage to the pump ff not continually drained from the pump casing
D.result in the system high side pressure to substantially drop off
最新試題
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?()
The control mode in which the final control element is moved from one of two flexed positions to the other is known as ().
Which of the problems listed would came the discharge temperature of an R-12 refrigeration compressor to increase?()
One cause of high head pressure occurring in a refrigeration system can be ().
A salinity indicator is used to determine the ().
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by ().
When the steering gear is in operation, you should ().
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by ().
A pressure drop through the refrigerant liquid line may cause ().
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?()