A.high temperature distillate can be re- circulated to induce additional flashing
B.scale formation is not a severe problem
C.cold shocking is more effective in removing scale
D.water purity is greatly increased at high capacity
您可能感興趣的試卷
你可能感興趣的試題
A.high pressure liquid line
B.low pressure liquid line
C.high pressure vapor line
D.low pressure vapor line
A.more efficiently uses available engine power
B.operates at a lower efficiency at a fixed speed
C.produces the same torque at lower engine power
D.develops its rated power at a lower speed
A.more efficiently uses available engine power
B.operates at a lower efficiency at a fixed speed
C.produces the same torque at lower engine power
D.develops its rated power at a lower speed
A.Dissipate heat
B.Trap foreign matter
C.Separate air from the oil
D.All of the above
A.Dissipate heat
B.Trap foreign matter
C.Separate air from the oil
D.All of the above
最新試題
The general purpose of a heat exchanger is to （）.
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
The usual symptoms of cavitation in a centrifugal pump is （）.
A salinity indicator is used to determine the （）.
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
When the steering gear is in operation, you should （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.