A.leaky discharge valves on the LP cylinder
B.leaky discharge valves on the HP cylinder
C.insufficient intercooler cooling
D.low ambient air pressure
您可能感興趣的試卷
你可能感興趣的試題
A.one size larger than the pump discharge nozzle
B.the same size as the pump discharge nozzle
C.one size smaller than the pump discharge nozzle
D.installed with a short radius elbow at the pump
A.purge the condenser if the waterside is dirty
B.check for proper water flow through the condenser
C.increase the high pressure cutout setting
D.reduce the cooling water flow
A.Red
B.White
C.Blue
D.Yellow
A.the flashing of the feed water
B.the condensation of the saltwater feed
C.air ejectors, eductors, or a separate vacuum pump
D.condensation of the distillate
A.under heavy loads
B.during hot gas defrost
C.under light loads
D.during starting conditions
最新試題
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
Low compressor head pressure in a refrigeration system can be caused by（）.
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?（）
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
The general purpose of a heat exchanger is to （）.