A.leaking discharge valve
B.jammed suction valve
C.tripped overload relay
D.broken discharge un-loader
您可能感興趣的試卷
你可能感興趣的試題
A.Liquids should never be transferred between tanks without consulting the dock master
B.If sea valves have been disassembled, all bonnets must be checked for leakage when the ship is re-floated
C.Before re-floating, all sea chest strainers should be verified as having been replaced
D.All of the above
A.In order for a fluid to be pumped, a fluid must be made to flow
B.A substance must be cold in order for it to be pumped
C.The kinetic energy imparted by the pump can be used to force a liquid through a hydraulic system
D.A pump must receive its energy from an external source
A.one size smaller than the pump suction nozzle
B.the same size as the pump suction nozzle
C.one size larger than the pump suction nozzle
D.installed with a short radius elbow at the pump
A.first stage flash chamber
B.second stage flash chamber
C.first stage after condenser
D.second stage distilling condenser
A.system is low on refrigerant
B.high pressure cutout switch is improperly adjusted
C.discharge valves are leaking slightly
D.discharge valves are leaking excessively
最新試題
An excessive charge of refrigerant in an air-cooled refrigeration system can cause ().
If the suction pressure at the refrigeration compressor is below normal, the cause can be().
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by ().
The usual symptoms of cavitation in a centrifugal pump is ().
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?()
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by ().
A pressure drop through the refrigerant liquid line may cause ().
The output volume of a positive fixed displacement pump can be changed only by ().