A.gate valve
B.globe valve
C.check valve
D.plug cock
您可能感興趣的試卷
你可能感興趣的試題
A.At the designed operating temperature, the liquid refrigerant charge has changed to a vapor
B.The liquid refrigerant tends to collect at the bellows or diaphragm and reduces the valve sensitivity
C.The sensing bulb is empty of liquid refrigerant charge at the designed operating temperature
D.The sensing bulb is never emptied of liquid refrigerant under normal operating conditions
A.diaphragm type gage
B.pressure transducer
C.manometer
D.All of the above
A.reduce radial thrust to the impeller
B.double the liquid velocity through the pump when compared to a single volute
C.reduce hydraulic end thrust
D.provide the effect of multi-staging
A.dirt will cause corrosion of bearing
B.bearings will leak oil excessively
C.dirt is very abrasive when mixed with grease
D.grease will become inflammable
A.promote refrigerant dehydration
B.be absorbed in the receiver
C.cause low condensing pressure
D.carry moisture and lead to corrosion
最新試題
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.
When the steering gear is in operation, you should （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.
A salinity indicator is used to determine the （）.
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?（）
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?（）
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.
A pressure drop through the refrigerant liquid line may cause （）.