A.Expansion valve
B.Evaporator
C.Drier
D.Receiver
您可能感興趣的試卷
你可能感興趣的試題
A.using a slightly dirty air filter
B.using oil having an excessive viscosity
C.intercooler or after-cooler leaks
D.carrying the oil level higher than normal
A.increased capacity of the compressor
B.more efficient operation of the thermal expansion valve
C.decreased capacity of the compressor
D.loss of receiver capacity
A.damage to the un-loader operating diaphragm
B.an increase in current flow to the motor
C.high pressure in the receiver and filter
D.an excessive consumption of crankcase oil
A.first stage
B.second stage
C.distillate cooler
D.salt water feed heater
A.Gravity siphon effect
B.Higher vacuum in the second-stage
C.Difference in brine density between first and second stages
D.lower pressure in first-stage
最新試題
Thermostatic expansion valves can be adjusted for （）.
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of （）.
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.
Which of the problems listed would came the discharge temperature of an R-12 refrigeration compressor to increase?（）
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
The general purpose of a heat exchanger is to （）.