A.open the steam line mot valve
B.drain the steam cylinder
C.close the steam cylinder drains
D.open the liquid cylinder drains
您可能感興趣的試卷
你可能感興趣的試題
A.rudder will respond sluggishly
B.hydraulic rams will over-speed
C.sight glass will show bubbles
D.ram relief valves will lift
A.continuous running of the compressor
B.high suction pressure
C.high discharge pressure
D.short cycling of the compressor on the water failure switch
A.the cooling effect of the condensate reduces the compressors efficiency
B.a danger of explosion exists whenever water is present in a compressor
C.water causes erratic operation of pneumatic components
D.the volumetric capacity of the first stage is reduced if water remains
A.the compressor short cycling on high pressure cut out switch
B.high suction pressure
C.high head pressure
D.bubbles in the sight glass
A.The two objects must be in physical contact
B.The two objects must be the same size
C.There must be an existing temperature differential
D.There must be an existing weight differential
最新試題
When a refrigeration compressor has developed a high head pressure as a result of a refrigerant overcharge, you should （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
A pressure drop through the refrigerant liquid line may cause （）.
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
Low compressor head pressure in a refrigeration system can be caused by（）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
If the head pressure of a reciprocating refrigeration compressor is excessive, （）.
Which of the listed pumps is NOT a positive displacement pump?（）
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.