A.draw a one line diagram of the circuitry
B.test all fuses and measure the line voltage
C.take megger readings
D.insulate the apparatus from ground
您可能感興趣的試卷
你可能感興趣的試題
A.melts and must be replaced
B.is enclosed in a tube of insulating material with metal ferrules at each end
C.gives no visual indication of having opened the circuit
D.trips to break the circuit and may be reset
A.brushes on a commutator
B.brushes on slip rings
C.slip rings on a commutator
D.direct connections from the stator
A.heat-resisting acrylic
B.heat-resisting aluminum
C.insulating varnish
D.insulating white lead
A.hydrogen chloride
B.calcium chloride
C.sulfuric acid
D.muriatic acid
A.can be reset to energize the circuit
B.should open the circuit when overloaded
C.will burn out when an over current flow develops
D.All of the above
最新試題
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
Diesel engine air start system check valves are opened by （）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Cold weather starting of a diesel engine may be made easier by（）
The treatment of the fuel oils involves storage, heating, filtering and（）