A.recorded as cubic meters with a conversion to barrels
B.verified by the Chief Engineer
C.recorded directly from the oil discharge monitor
D.consistently recorded through the Oil Record Book in one specified unit (gallons, barrels, cubic meters)
您可能感興趣的試卷
你可能感興趣的試題
A.look for a CO2 extinguisher
B.use a soda acid extinguisher
C.shut off the fuel supply
D.smother the fire with rags
A.heat, gas, and flames
B.fuel, heat, and oxygen
C.heat, nitrogen, and fuel
D.fuel oil, nitrogen, and oxygen
A.6 hours
B.12 hours
C.18 hours
D.24 hours
A.notify the engineer on watch
B.isolate and secure the piping
C.throw sand on the fire
D.extinguish the fire using a combination nozzle with applicator
A.carbon monoxide
B.oxygen
C.carbon dioxide
D.any gaseous substance
最新試題
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
If separating effect is not good, which measure should be taken （）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
Under MARPOL Code the ship to which it applies has to carry （）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
The condensers located in various stages of a flash evaporator are cooled by（）