A.to the bottom of the expansion trunk
B.to within 1% to 3% of its capacity
C.to within 1% to 3% inches of its capacity
D.1 to 3 inches from top of the vent pipe
您可能感興趣的試卷
你可能感興趣的試題
A.draped over the fantail to dry out
B.drained over the side and washed out
C.drained into the bilges and washed out
D.drained into buckets or fuel tanks
A.open the watertight door and take a quick look
B.open the hatch dogs on the side away from the hinges
C.tap the bulkhead with a hammer to check for a water level
D.feel the bulkhead to see if it is hot
A.take shallow breaths of air
B.ventilate the area
C.wear a breathing apparatus while working
D.keep a charged fire hose handy
A.type of fuel transfer pump aboard
B.temperature of the fuel oil being received
C.size of the fuel storage tanks ashore
D.distance from the fuel oil storage tanks ashore
A.calculating the ullage in the cargo tanks
B.loading ballast by gravity
C.the loading of new cargo into the slop tank as a procedure to minimize pollution
D.calculating the ratio of cargo expansion in a cargo tank
最新試題
Diesel engine air start system check valves are opened by ()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
The ISPS Code consists of a mandatory section-Part A, which shows()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
The cetane rating of diesel fuel is an indication of the ()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
The condensers located in various stages of a flash evaporator are cooled by()