A.cylindrical in shape with service connections located at the top and bottom
B.opened and made available for inspection during biannual inspections provided
C.with automatic drain traps for the removal of moisture
D.so installed as to make the drain connections effective under extreme conditions of trim
您可能感興趣的試卷
你可能感興趣的試題
A.Hydraulic stress and distortion will develop
B.Hot spots will develop
C.Fuel oil viscosity will increased
D.An increase in trapped deposits of scale and dirt
A.power and intake
B.intake and exhaust
C.exhaust and compression
D.compression and power
A.Hydraulic oil pressure
B.Servomotor action
C.Flyweight centrifugal force
D.Relay motion
A.low coolant temperature
B.insufficient fuel
C.high ambient temperature
D.carbon buildup on the injector tips
A.the splashing of lubrication oil by the crankshaft
B.the dilution of crankcase oil with particles of combustion
C.broken fuel lines spraying oil on the crankcase
D.the ignition of unburned fuel and air in the crankcase
最新試題
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
() is not installed on the main switchboar.
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
To proceed to the assistance of a ship in distress is()
Flame failure in an automatically fired auxiliary boiler can from a/an ()