A.an air bound fuel system
B.damage to cylinder heads and pistons
C.excessive fuel injection
D.excessive air valve lift
您可能感興趣的試卷
你可能感興趣的試題
A.excessive fuel oil temperature
B.long periods of engine overload
C.metallic contact between nozzles and cylinder heads
D.hard carbon deposit and varnish on the nozzles
A.opposed to the crankshaft rocking couple
B.resonant with the crankshaft natural frequency
C.critical fore and aft crankshaft vibrations
D.horizontal whipping motions of the crankshaft
A.cylindrical in shape with service connections located at the top and bottom
B.opened and made available for inspection during biannual inspections provided
C.with automatic drain traps for the removal of moisture
D.so installed as to make the drain connections effective under extreme conditions of trim
A.Hydraulic stress and distortion will develop
B.Hot spots will develop
C.Fuel oil viscosity will increased
D.An increase in trapped deposits of scale and dirt
A.power and intake
B.intake and exhaust
C.exhaust and compression
D.compression and power
最新試題
The condensers located in various stages of a flash evaporator are cooled by()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
If separating effect is not good, which measure should be taken ()
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
() is not installed on the main switchboar.
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?()