A.produce the heat for ignition
B.decrease injection lag
C.increase ignition delay
D.aid in exhausting burnt gases
您可能感興趣的試卷
你可能感興趣的試題
A.low sulfur content in the fuel
B.a loose injector inlet connection
C.late fuel injection
D.high injection pressure
A.Shape of the piston crowns
B.Increasing the compression ratios
C.Increasing the piston crowns
D.Increasing the turbocharger gear ratio
A.Spark plug
B.Heat of compression
C.Carburetor
D.Glow plug
A.low compression temperature
B.low ambient air pressure
C.high lube oil pump pressure
D.high fuel oil booster pump pressure
A.later and closing earlier
B.later and closing later
C.earlier and closing earlier
D.earlier and closing later
最新試題
Flame failure in an automatically fired auxiliary boiler can from a/an （）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
The cetane rating of diesel fuel is an indication of the （）
The treatment of the fuel oils involves storage, heating, filtering and（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
To proceed to the assistance of a ship in distress is（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.