A.grinding the spare plunger to the barrel
B.replacing the plunger and the barrel
C.highly polishing both the plunger and barrel
D.replacing plunger only
您可能感興趣的試卷
你可能感興趣的試題
A.Control the amount of lube oil burned in the combustion chamber
B.Transmit heat from the piston to the cylinder liner
C.Prevent damage to ring groove inserts by acting as a heat dam
D.Dissipate combustion chamber gas pressure by channeling it through the ring gap
A.transfer heat from the cylinder to the piston
B.scrape oil from the sides of the piston
C.seal the combustion space from the crankcases
D.prevent any piston contact with the cylinder liner
A.compression ratio of the engine
B.volume of the engine
C.relationships between pressure and volume during one stroke of the engine
D.relationships between pressure and volume during one cycle of the engine
A.once every crankshaft revolution
B.once every two crankshaft revolutions
C.once every piston stroke
D.twice every piston stoke
A.entirely constant pressure
B.entirely constant temperature
C.a combination of constant volume and constant pressure
D.a combination of constant temperature and constant pressure
最新試題
Under MARPOL Code the ship to which it applies has to carry ()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Diesel engine air start system check valves are opened by ()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Which of the following items don’t belong to dock repair works?()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.