A.axial loads
B.firing loads
C.inertia loads
D.centripetal loads
您可能感興趣的試卷
你可能感興趣的試題
A.moving the governor control to stop
B.shutting off the lubricating oil supply
C.tripping the governor emergency stop lever
D.shutting off the fuel supply
A.low exhaust back pressure
B.early fuel injection in one of the cylinders
C.compression pressure in one of the cylinders
D.plugged injector holes
A.cold intake air
B.excessive compression pressure
C.excessive cylinder lubrication
D.a light load
A.grinding the spare plunger to the barrel
B.replacing the plunger and the barrel
C.highly polishing both the plunger and barrel
D.replacing plunger only
A.Control the amount of lube oil burned in the combustion chamber
B.Transmit heat from the piston to the cylinder liner
C.Prevent damage to ring groove inserts by acting as a heat dam
D.Dissipate combustion chamber gas pressure by channeling it through the ring gap
最新試題
The main purpose of port State control is not to（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
（） is not installed on the main switchboar.
To proceed to the assistance of a ship in distress is（）
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
The shipboard oil pollution emergency plan will be invalid after （）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
The condensers located in various stages of a flash evaporator are cooled by（）
The cetane rating of diesel fuel is an indication of the （）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）