A.deaerate the first effect distillate
B.filter the condensed flash vapors
C.deaerate the first and second effect distillate
D.remove small water droplets entrained in the flashed vapor
您可能感興趣的試卷
你可能感興趣的試題
A.vacuum drag from the auxiliary condensate system
B.individual vacuum pumps
C.a single non-condensing air ejector
D.a two stage air ejector
A.vaporize, with the un-flashed water remaining at the temperature at which it entered the flash chamber
B.vaporize, with the un-flashed eater equalizing to the saturation conditions existing in the f lash chamber
C.vaporize, with the remaining water a t a temperature greater than it entered the flash chamber
D.boil, allowing steam bubbles to rise through the brine at the bottom of the flash chamber
A.combined as part of the salt water feed heater
B.the open area above the brine levels in the first and second stages
C.combined as part of the distillate cooler
D.another term used to describe the vapor feed heater
A.distilling condenser
B.salt water feed heater
C.distillate cooler
D.flash chamber
A.higher than the first stage feed-water temperature and absolute shell pressure
B.lower than the first stage feed-water temperature and absolute shell pressure
C.the same as the first stage feed-water temperature and absolute shell pressure
D.not related to the feed-water temperature and absolute shell pressure
最新試題
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the()
Flame failure in an automatically fired auxiliary boiler can from a/an ()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
The treatment of the fuel oils involves storage, heating, filtering and()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Which of the following items don’t belong to dock repair works?()