A.expansion space to leave in a tank
B.flash point at which the fuel will burn
C.temperature to which the fuel must be heated
D.rate at which the fuel can be pumped during transfer operations
您可能感興趣的試卷
你可能感興趣的試題
A.second stage feed heater
B.saltwater feed heater
C.distillate cooler
D.second stage vapor separator
A.spray pipes
B.demisters
C.condensers
D.splash baffles
A.deaerate the first effect distillate
B.filter the condensed flash vapors
C.deaerate the first and second effect distillate
D.remove small water droplets entrained in the flashed vapor
A.vacuum drag from the auxiliary condensate system
B.individual vacuum pumps
C.a single non-condensing air ejector
D.a two stage air ejector
A.vaporize, with the un-flashed water remaining at the temperature at which it entered the flash chamber
B.vaporize, with the un-flashed eater equalizing to the saturation conditions existing in the f lash chamber
C.vaporize, with the remaining water a t a temperature greater than it entered the flash chamber
D.boil, allowing steam bubbles to rise through the brine at the bottom of the flash chamber
最新試題
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
To proceed to the assistance of a ship in distress is()
Cold weather starting of a diesel engine may be made easier by()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
The treatment of the fuel oils involves storage, heating, filtering and()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
The shipboard oil pollution emergency plan will be invalid after ()
() is not installed on the main switchboar.