A.Low lube oil temperature
B.Dirty lube oil strainer
C.Low lube oil pressure
D.High lube oil temperature
您可能感興趣的試卷
你可能感興趣的試題
A.improper adjustment of the bypass valve
B.a dribble in the fuel injection nozzle
C.insufficient leak-off through injection nozzle packing
D.a malfunctioning injection nozzle
A.hold the valves open
B.keep the valves off their seats until the exhaust stroke is completed
C.close the valves
D.open inlet valves when the air injection cycle begins
A.increased engine breathing efficiency
B.excessive valve lash
C.excessive lube oil consumption
D.lower than normal fuel consumption
A.Fuel
B.Lubricating
C.Cooling
D.Ignition
A.high lube oil viscosity
B.increased lube oil consumption
C.low lube oil temperatures
D.high firing pressures
最新試題
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
() is not installed on the main switchboar.
Which of the following items don’t belong to dock repair works?()
Diesel engine air start system check valves are opened by ()
The ISPS Code consists of a mandatory section-Part A, which shows()
Under MARPOL Code the ship to which it applies has to carry ()
The treatment of the fuel oils involves storage, heating, filtering and()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
The cetane rating of diesel fuel is an indication of the ()