A.the pump supply pressure
B.the slope of the fuel cam
C.how the plunger is rotated
D.the number of sleeve segments engaged with the rack
您可能感興趣的試卷
你可能感興趣的試題
A.cavitation erosion in the water jackets
B.excess corrosion inhibitor in the coolant
C.dirty jacket water cooler
D.defective turbocharger
A.Increased turbulence
B.increased mechanical efficiency
C.Increased brake mean effective pressure
D.All of the above
A.high exhaust temperature
B.low exhaust temperature
C.fuel knock in each cylinder
D.mechanical knock in each cylinder
A.sea water temperature must never be warmer than 40℃
B.jacket water pressure should always be greater than the sea water pressure
C.jacket water temperature must always be less than 60℃
D.jacket water pressure must always be less than the sea water pressure
In a medium speed diesel engine, a trunk type piston may be cooled by（）
Ⅰ.oil circulation though passages in the piston crown
Ⅱ.heat transfer through piston rings and liner wall
A.Ⅰ only
B.Ⅱ only
C.either Ⅰ or Ⅱ
D.neither Ⅰ or Ⅱ
最新試題
If separating effect is not good, which measure should be taken （）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish