A.employing fuel oil as a cooling medium
B.preventing hard carbon deposit on nozzle tips
C.avoiding fuel oil temperature exceeding builder’s specification
D.ensuring good metallic contact between nozzles and cylinder heads
您可能感興趣的試卷
你可能感興趣的試題
A.it is fitted with neoprene O-ring seals
B.the honing process makes it easier to maintain the desired oil film
C.there is likelihood of water leaking into the combustion space
D.it fits more loosely due to a decrease in heat transfer through the composite wall
A.high average exhaust manifold
B.greatly fluctuating inlet manifold pressure
C.constant exhaust manifold pressure
D.multiple exhaust pipes to the turbocharger
A.lower thermal expansion rates than wet liners
B.greater heat transfer rate than wet liners
C.greater wear resistance than wet liners
D.procedure to replace dry liners is simpler than for wet liners
A.exhaust gas pressure
B.exhaust gas temperature
C.speed
D.load
A.Viscosity is decreased
B.Octane number is altered
C.Pump speed is decreased
D.Blower’s speed is decreased
最新試題
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
The ISPS Code consists of a mandatory section-Part A, which shows()
The condensers located in various stages of a flash evaporator are cooled by()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Which of the following items don’t belong to dock repair works?()