A.increasing cooling water flow
B.increasing lube oil flow
C.dilution by fuel oil
D.adding SAE 70 oil
您可能感興趣的試卷
你可能感興趣的試題
A.engine power losses
B.smoking due to unburned fuel
C.high exhaust temperature readings
D.all of the above
A.incorrect replacement of barrels and plungers of jerk pumps
B.overheating of the nozzle orifices
C.cracked pump housings
D.dirt in the fuel
A.tachometer
B.pyrometer
C.dynamometer
D.calorimeter
A.employing fuel oil as a cooling medium
B.preventing hard carbon deposit on nozzle tips
C.avoiding fuel oil temperature exceeding builder’s specification
D.ensuring good metallic contact between nozzles and cylinder heads
A.it is fitted with neoprene O-ring seals
B.the honing process makes it easier to maintain the desired oil film
C.there is likelihood of water leaking into the combustion space
D.it fits more loosely due to a decrease in heat transfer through the composite wall
最新試題
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The treatment of the fuel oils involves storage, heating, filtering and()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
Using a file without a handle may result in ()
The condensers located in various stages of a flash evaporator are cooled by()
The main purpose of port State control is not to()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
Diesel engine air start system check valves are opened by ()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()