A.reduce the wear of bearing surfaces
B.cool the bearing surfaces
C.assist in sealing bearing surfaces
D.all of the above
您可能感興趣的試卷
你可能感興趣的試題
A.Non-harmonic speed
B.Critical speed
C.Maximum speed
D.Design maximum speed
A dirty fuel oil filter is can be detected by （）
Ⅰ.fuel oil analysis
Ⅱ.observing the pressure drop across the filter
A.Ⅰonly
B.Ⅱonly
C.eitherⅠorⅡ
D.neitherⅠnor
A.increase the density of the intake air
B.decrease turbocharger power usage
C.reduce exhaust gas temperature
D.compensate for turbocharger PRM fluctuations
A.high oil pressure
B.excessive bearing end play
C.plugged oil control rings
D.engine overload
A.leaking delivery valve
B.excessive bearing end play
C.plugged injector spray hole
D.increased plunger stroke
最新試題
If separating effect is not good, which measure should be taken （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
（） is not installed on the main switchboar.
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）