A.late fuel injection
B.early fuel injection
C.high exhaust temperature from that cylinder
D.decreased effective stroke from that injector
您可能感興趣的試卷
你可能感興趣的試題
In a diesel engine, exhaust valves open before the intake ports are uncovered to （）
Ⅰ.reduce pumping losses
Ⅱ.reduce back pressure
A.Ⅰonly
B.Ⅱonly
C.bothⅠand Ⅱ
D.neitherⅠnor Ⅱ
A.Intake manifold
B.Water-cooled exhaust system
C.After-cooler
D.Exhaust diffuser
A.fuel will not be properly atomized in the cylinder
B.ignition will be delayed due to low ignition temperature
C.maximum fuel expansion will occur on the compression stroke
D.fuel will ignite before top dead center
A.air compressor
B.diffuser
C.after-cooler
D.ventilator
A.Loss of engine power and high exhaust temperatures
B.Higher than normal firing pressure and low exhaust temperatures
C.High fuel consumption and high exhaust temperatures
D.Lower than normal compression pressure and high exhaust temperature
最新試題
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
Diesel engine air start system check valves are opened by （）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
The ISPS Code consists of a mandatory section-Part A, which shows（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
Using a file without a handle may result in （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）