單項選擇題Proper lubrication of the main bearings is more easily obtained in a single acting, four-stroke/cycle diesel engine than in a tow-stroke/cycle diesel engine because（）.

A.The direction of pressure on the journal in four-stroke engine is continuously
B.positive feed lubricators are installed on all bearings of four-stroke engine, whereas as a splash feed system is used on tow-stroke engine
C.four-stroke engines usually utilize a heavier grade of oil than tow-stroke engines
D.Low-stroke engines usually consume less lube oil than four-stroke engines


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題If the low level alarm of the diesel fuel day tank fails to function, you can expect trouble from（）

A.overheated injection pumps
B.water condensed in the cylinders
C.fuel dilution of the lube oil
D.air in the fuel system

2.單項選擇題Before starting a diesel engine, you should always（）

A.check the pyrometer readings
B.check the crankcase oil level
C.check the fuel oil strainers
D.clean the fuel system

3.單項選擇題Sludge formation in a diesel engine lube oil system is caused by（）

A.carbonization of oils from the combustion chambers
B.emulsions of lube oil and water
C.coagulation of unburned fuel below the piston rings
D.all of the above

4.單項選擇題A diesel engine is turned at normal cranking speed, but fails to fireThis can occur from （）

A.low lube oil temperature
B.low starting air temperature
C.air in the fuel injection
D.water in the starting air system

5.單項選擇題Which of the following statements represents the reason for rolling over a diesel engine with the cylinder indicator cocks open prior?（）

A.To test the starting system
B.To remove air bubbles from the jacket water
C.To ensure that the lube oil system delivers pressure
D.To ensure foreign material (water etc) is not present in the cylinders