A.the firing pressure in the cylinder
B.a metering helix inside the pump
C.varying the physical length of the plunger stroke
D.varying the clearance between the injector cam and the injector rocker arm
您可能感興趣的試卷
你可能感興趣的試題
A.Air filters
B.Fuel oil strainers
C.Crank case oil level
D.Pyrometer readings
A.increases the density of the air
B.decrease the density of the air
C.increases the specific heat of the air
D.decreases the specific heat of the exhaust
A.The direction of pressure on the journal in four-stroke engine is continuously
B.positive feed lubricators are installed on all bearings of four-stroke engine, whereas as a splash feed system is used on tow-stroke engine
C.four-stroke engines usually utilize a heavier grade of oil than tow-stroke engines
D.Low-stroke engines usually consume less lube oil than four-stroke engines
A.overheated injection pumps
B.water condensed in the cylinders
C.fuel dilution of the lube oil
D.air in the fuel system
A.check the pyrometer readings
B.check the crankcase oil level
C.check the fuel oil strainers
D.clean the fuel system
最新試題
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
The shipboard oil pollution emergency plan will be invalid after ()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
() is not installed on the main switchboar.
The main purpose of port State control is not to()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()