A.An increased air temperature differential between the cooler inlet and outlet
B.A decrease in the air pressure differential across the cooler
C.Excessive condensate forming in the air box
D.A decrease in the air temperature differential between the cooler inlet and outlet
您可能感興趣的試卷
你可能感興趣的試題
A.lube oil pumping
B.rotating rings
C.gas pressure behind the ring
D.passage of hot gases
A.insufficient lubrication
B.improper piston cooling
C.blow-by
D.overload operation
A.has a crown-face
B.exceeds wear limits through normal wear
C.has excessive blow-by
D.is in good condition
A.combustion gas blow-by
B.excessive lubrication
C.properly functioning rings
D.insufficient cylinder cooling
A.Blank off the exhaust gas inlet to the damaged turbocharger
B.Secure cooling and lubrication to the damaged turbocharger
C.Lock the rotor of the damaged turbocharger
D.All of the above
最新試題
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
The shipboard oil pollution emergency plan will be invalid after ()
Using a file without a handle may result in ()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
The main purpose of port State control is not to()
The cetane rating of diesel fuel is an indication of the ()
() is not installed on the main switchboar.
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
The condensers located in various stages of a flash evaporator are cooled by()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()