A.engine operating speed
B.an air manifold
C.a hydraulic distributor
D.individual cams and valve gear
您可能感興趣的試卷
你可能感興趣的試題
A.the air start valve timing gears and rods
B.a cylinder check valve
C.individual cams and valve gear
D.an air manifold poppet valve
A.degree of cylinder air turbulence
B.firing pressure in the engine
C.quality of fuel to be injected
D.duration of the ignition delay period
A.laying a straight edge across the crank webs at the crankpin and measuring the distance to the crankpin in two places
B.measuring the crank drop on either side of each crank throw while the crankshaft is slowly rotated through one revolution
C.rotating the crankshaft through one revolution, pausing each 90oof rotation to measure bearing clearances, top and bottom
D.taking micrometer reading between the crank cheeks opposite the crankpin every 90°of crank angle rotation
A.electronic ignition system
B.compression of air by the piston
C.friction in the fuel injector
D.fuel oil bearing system
A.placed as near the crankpin axis as possible
B.removed each time the crankshaft is repositioned
C.left in place for all four readings
D.reset to zero for all four readings
最新試題
The ISPS Code consists of a mandatory section-Part A, which shows()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
To proceed to the assistance of a ship in distress is()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
The shipboard oil pollution emergency plan will be invalid after ()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
The cetane rating of diesel fuel is an indication of the ()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Flame failure in an automatically fired auxiliary boiler can from a/an ()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.