單項選擇題Cold clearances between the skirt of an aluminum piston and the cylinder liner is about （）

A.twice as large as with a cast iron piston
B.the same size as with a cast iron piston
C.half as large as with a cast iron piston
D.the same size as the crown of an aluminum piston


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Exhaust valve openings in a diesel engine cylinder head are made as large as practical to （）

A.increase back pressure during the exhaust process
B.facilitate periodic replacement of the valves
C.reduce the pumping loss associated with scavenging
D.reduce tension on valve springs

2.單項選擇題If the compression rings on a diesel engine piston become stuck in the ring groove, the cause may be due to（）

A.excessive ring action
B.excessive ring temperature
C.improper ring rotation
D.excessive ring face wear

4.單項選擇題The size of the exhaust valve opening is （）

A.most critical in a four-stroke cycle diesel engine
B.most critical in a two-stroke/cycle diesel engine
C.most critical in a four-stroke/cycle diesel engine if it is turbocharged
D.of equal importance in a two-stroke/cycle diesel engine as in a four-stroke/cycle diesel engine

5.單項選擇題If the piston groove drain holes for the oil control rings become clogged, which of the following is likely to occur?（）

A.The oil control rings will seal improperly and wear rapidly
B.The piston will overheat due to insufficient lubrication
C.Excessive oil will remain on the cylinder wall
D.Light brown smoke will emanate from the engine exhaust