A.early fuel injection timing
B.leaking valves
C.a continuously open scavenge air port
D.low cooling water temperature
您可能感興趣的試卷
你可能感興趣的試題
A.clogged air filter
B.compression stroke
C.burned exhaust valves
D.all of the above
A.intake stroke
B.compression stroke
C.power stroke
D.exhaust stroke
A.When heated, it will move proportional to the amount the metal has lengthened or expanded
B.The pointer associated with the pyrometer scale can be made to also measure engine RPM
C.It can be utilized in exhaust manifolds and heat exchangers interchangeably
D.It can indicate temperature at a distant point from the source heat
A.Low compression pressure and high exhaust temperature
B.Low firing pressure and high exhaust temperature
C.Low compression pressure and low exhaust temperature
D.Low firing pressure and low exhaust temperature
A.later and close sooner
B.sooner and close later
C.sooner and close sooner
D.later and close later
最新試題
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
The condensers located in various stages of a flash evaporator are cooled by()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.