A.provide exhaust back pressure
B.prevent exhaust smoke emissions
C.power a reciprocating supercharger
D.muffle exhaust gas noise
您可能感興趣的試卷
你可能感興趣的試題
A.Plugged injector nozzles
B.Excessive fuel injection
C.Very late injection timing
D.Incorrect crankshaft clearance
A.a glazed surface on the spring
B.nicks in the protective coating
C.a build up of sludge deposits
D.cracks in the surface of the spring
A.Frequent draining of accumulated moisture
B.Frequent testing of relief valves
C.A close watch on temperature to prevent fluctuations in pressure
D.Frequent cleaning to re move oil and foreign matter
A.over-speeding
B.overload
C.low exhaust temperature
D.high crankcase pressure
A.line up the engine fore restarting with light diesel oil
B.reposition the fuel injection cam
C.change the intake and exhaust valve cam positions
D.place the starting cam in the intermediate position
最新試題
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The condensers located in various stages of a flash evaporator are cooled by（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
The main purpose of port State control is not to（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Flame failure in an automatically fired auxiliary boiler can from a/an （）
If separating effect is not good, which measure should be taken （）
The cetane rating of diesel fuel is an indication of the （）
Using a file without a handle may result in （）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.