A.liquid in the cylinder
B.low compression in the cylinder
C.high exhaust temperature
D.poor fuel penetration
您可能感興趣的試卷
你可能感興趣的試題
A.amount of scavenge air to the cylinder
B.quality of fuel injected
C.viscosity of the lube oil
D.compression ratio of the piston
A.compression must be low for effective spark ignition
B.compression must be low for required horsepower and torque generation
C.compression must be low to prevent pre-ignition
D.compression must be low to have effective pre-ignition
A.provide exhaust back pressure
B.prevent exhaust smoke emissions
C.power a reciprocating supercharger
D.muffle exhaust gas noise
A.Plugged injector nozzles
B.Excessive fuel injection
C.Very late injection timing
D.Incorrect crankshaft clearance
A.a glazed surface on the spring
B.nicks in the protective coating
C.a build up of sludge deposits
D.cracks in the surface of the spring
最新試題
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
() is not installed on the main switchboar.
The ISPS Code consists of a mandatory section-Part A, which shows()
Diesel engine air start system check valves are opened by ()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()