A.overloading the engine
B.low exhaust valve lift
C.excessive cylinder cooling
D.insufficient mechanical clearance
您可能感興趣的試卷
你可能感興趣的試題
A.exhaust manifold
B.valve bridge
C.pressure of the fresh air charge
D.valve adjusting gear
A.excessive compression pressure
B.air in the fuel lines
C.high fuel pressure
D.excessive load
A.reduce lube oil temperature
B.raise exhaust temperature reduce
C.excessive heating of engine room
D.reduce load on cooling water pump
A.gap
B.side
C.back
D.radial
A.low exhaust back pressure
B.high lube oil temperature
C.insufficient cranking speed
D.excessive fuel atomization
最新試題
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
The cetane rating of diesel fuel is an indication of the ()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
If separating effect is not good, which measure should be taken ()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.