A.low exhaust back pressure
B.air in the fuel system
C.gasket blow-by or leakage
D.incorrect assembly of idler springs
您可能感興趣的試卷
你可能感興趣的試題
A.Hydraulic starting
B.Electric starting
C.Ignition
D.Fuel
A.pumping action of the piston
B.pressure of the fuel charge
C.vacuum developed in the manifold
D.pressure of the fresh air charge
A.Electric power and starting air
B.Lube oil standby pump and control air
C.Hydraulic switch and engage jacking gear
D.Motor drain and pneumatic control system power
A.engine overload
B.leaky valves
C.stuck or broken piston rings
D.low air injection pressure
A.Corrosion and eventual failure of the tank
B.Gumming of the tank relief valves
C.Immediate failure of components downstream of the compressed air system
D.Boiling of the water oil mixture as pressure is reduced
最新試題
（） is not installed on the main switchboar.
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
If separating effect is not good, which measure should be taken （）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）