A.proper break-in wear
B.improper break-in wear
C.relocation of the overlay flashing
D.water contamination of the lube oil system
您可能感興趣的試卷
你可能感興趣的試題
A.water in the fuel
B.cold lube oil
C.excessive starting air pressure
D.excessive fuel pressure
A.fuel pump should be removed and all connections blanked off
B.cylinder oil feed rate should be increased slightly above that used at normal sea speed
C.cylinder oil feed rate should be reduced
D.cylinder oil feed rate should be increased to the maximum flow capable of the metering pump
A.the proper back pressure
B.the cooling water temperature
C.correct timing and proper seating
D.accurate metering and the exhaust temperature
A.low exhaust back pressure
B.air in the fuel system
C.gasket blow-by or leakage
D.incorrect assembly of idler springs
A.Hydraulic starting
B.Electric starting
C.Ignition
D.Fuel
最新試題
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
Using a file without a handle may result in ()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
Which of the following items don’t belong to dock repair works?()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
The shipboard oil pollution emergency plan will be invalid after ()
Diesel engine air start system check valves are opened by ()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.