A.glazed liners or pistons
B.high lube oil pressure
C.excessive compression ratio
D.worn valve seats and valves
您可能感興趣的試卷
你可能感興趣的試題
A.governor droop
B.speeder spring tension
C.fuel rack lag
D.load on the engine
A.a cracked cylinder liner
B.clogged intake ports
C.broken piston rings
D.a faulty head gasket
A.increase the starting air pressure
B.use a higher than normal cranking speed
C.increase the fuel injection pressure
D.use a fuel having a lower ignition temperature
A.soft water pump was not secured along with the engine
B.jacket water thermostat has failed
C.cylinder liner may be cracked
D.raw water pump is over-speeding just prior to engine shutdown
A.excessive fuel pressure
B.high lube oil viscosity
C.inadequate fuel injection
D.excessive starting air pressure
最新試題
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Diesel engine air start system check valves are opened by （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The treatment of the fuel oils involves storage, heating, filtering and（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
Under MARPOL Code the ship to which it applies has to carry （）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.