A.increasing the quantity of starting air
B.increasing the lube oil pressure
C.heating the engine fuel supply
D.heating the engine coolant
您可能感興趣的試卷
你可能感興趣的試題
A.Faulty thermostatic bypass valve
B.Eroded zinc pencils in the heat exchanger
C.Steam formation in the expansion tank
D.Excessive leakage from jacket water pump seal
A.overloading in all cylinders
B.a jammed three-way thermostatic valve
C.chromate PH too low
D.a high level in the surge tank
A.conducted through the engine block
B.conducted to water cooled cylinder walls
C.conducted through the piston crown
D.loss to escaping exhaust gases
A.Exhaust temperatures
B.Raw water pressure
C.Lube oil pressure
D.Air box pressure
A.rotary;reciprocating
B.up and down;fore and aft
C.fore and aft;up and down
D.up and down;rotary
最新試題
Using a file without a handle may result in ()
Under MARPOL Code the ship to which it applies has to carry ()
Diesel engine air start system check valves are opened by ()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
The shipboard oil pollution emergency plan will be invalid after ()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
The treatment of the fuel oils involves storage, heating, filtering and()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()