A.lower compression pressures
B.overheating without smoking
C.failure to start
D.a run away without load
您可能感興趣的試卷
你可能感興趣的試題
A.Flywheel inertia
B.Admission of starting air
C.The way of the vessel
D.securing of fuel to the cylinders
A.decreasing the compression ratio
B.using a special fuel having a high ignition temperature
C.increasing the starting air supply
D.heating the jacket water
A.increasing the quantity of starting air
B.increasing the lube oil pressure
C.heating the engine fuel supply
D.heating the engine coolant
A.Faulty thermostatic bypass valve
B.Eroded zinc pencils in the heat exchanger
C.Steam formation in the expansion tank
D.Excessive leakage from jacket water pump seal
A.overloading in all cylinders
B.a jammed three-way thermostatic valve
C.chromate PH too low
D.a high level in the surge tank
最新試題
The ISPS Code consists of a mandatory section-Part A, which shows()
If separating effect is not good, which measure should be taken ()
The treatment of the fuel oils involves storage, heating, filtering and()
() is not installed on the main switchboar.
Which of the following items don’t belong to dock repair works?()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.