A.reduce load
B.check your exhaust
C.adjust cooling water temperature
D.increase lube oil flow
您可能感興趣的試卷
你可能感興趣的試題
A.Lubrication to the defective cylinder should be increased
B.Cooling water temperature to the engine should be increased
C.Only the turbocharger speed should be reduced
D.Engine speed should be reduced
A.incorrect injection timing
B.low exhaust back pressure
C.floating exhaust valves
D.excessive cranking speed
A.electrical overload
B.surging at governed RPM
C.loose engine mounting bolts
D.coolant leaking into the cylinder
A.check the air filter for obstruction
B.check for an exhaust leak
C.check the exhaust temperature
D.secure the engine
A.over-speeding of the engine
B.failure of the engine to shut down
C.no effect of engine mounting bolts
D.high exhaust temperatures
最新試題
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
The treatment of the fuel oils involves storage, heating, filtering and()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The main purpose of port State control is not to()
Flame failure in an automatically fired auxiliary boiler can from a/an ()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()