單項選擇題In a shell-and-tube type hydraulic fluid cooler, the amount of heat transferred from the hydraulic fluid to the cooling water depends upon（）

A.the temperature of the hydraulic fluid
B.the flow rate of the hydraulic fluid
C.the temperature of the cooling water
D.all of the above


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題An orifice-check valve placed in a hydraulic system is used to（）

A.regulate the fluid flow in either direction
B.restrict movement of hydraulic fluid in one direction, but allow free movement in the other direction
C.allow free movement of hydraulic fluid in both directions
D.allow a restricted fluid flow in one direction only

2.單項選擇題Purging air from a hydraulic system is necessary when（）

A.adding small amounts of oil to the system
B.the system has been overheated
C.the system has been drained and then filled with new oil
D.the system has been idle for a long period of time

3.單項選擇題Leakage of hydraulic fluid from around the shaft of a hydraulic motor may be caused by（）

A.permanent loss of pump suction
B.worn shaft seals
C.high level in the oil sump
D.low motor RPM

4.單項選擇題Air trapped in the hydraulic fluid of a steering system would be indicated by（）

A.an improper rudder response
B.hammering noises in the equipment or transmission lines
C.popping or sputtering noises
D.all the above

5.單項選擇題How can the chance of contaminating hydraulic fluid be decreased when working on hydraulic system?（）

A.clean the fittings before they are disconnected
B.Place drip pans under leaky fittings
C.Seal any cracks in lines with Permatex
D.Coat all threads with graphite oil