A.nuts
B.screws
C.studs
D.flanges
您可能感興趣的試卷
你可能感興趣的試題
A.The alternators are not generating the same voltages and should be adjusted on automatic voltage regulator rheostats
B.Alternator frequencies are different and should be adjusted on the governor speed controllers
C.Alternators are out of phase and should be tripped and paralleled again
D.One alternator has lost one of its phases
A.high input impedance, high gain and low output impedance
B.high input impedance, high gain and high output impedance
C.low input impedance, low gain and high output impedance
D.low input impedance, high gain and low output impedance
A.methyl chloride
B.ammonia
C.hydrofluoric acid
D.ozone
A.one valve seats upwards, while the other seats downwards
B.the reed valves used on the discharge are made substantially thicker and heavier than the suction valves
C.the suction valve springs exert a greater tension than the discharge valve springs
D.the discharge valve springs exert a greater tension than the suction valve springs
A.The reservoir would become vapor bound
B.The valve would be placed in hydraulic lock
C.The spring loaded relief ports would open
D.The buffering chambers would be unable to function
最新試題
If separating effect is not good, which measure should be taken ()
The main purpose of port State control is not to()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
The cetane rating of diesel fuel is an indication of the ()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
The shipboard oil pollution emergency plan will be invalid after ()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()