A.rudder mountings
B.anchor gear
C.hull plating
D.vessel framing
您可能感興趣的試卷
你可能感興趣的試題
A.sheer strake
B.gatewood strake
C.insulation strake
D.garboard strake
A.a safety interlock in a cargo winch that prevents the runner from overspeeding
B.a stopper that prevents the anchor cable from running free if the cable jumps the wildcat
C.the device that locks the deck lashings of the Peck and Hale system
D.the lug that rides on the eccentric rib and engages the locking ring on the windlass
A.To support the overhang of the stern
B.To strengthen the plating against the pounding of the sea
C.To add strength to the deck beams which support the weather deck
D.To support the plating of a cylindrical tank
A.Texas deck
B.water table
C.stabbing board
D.monkey board
A.cradle
B.draft
C.harping
D.manger
最新試題
The athwartship hull structural members of a ship are（）.
The strake on each side of the keel is called a（）.
The antennas of the trucks on deck are not fitted（）.
To determine the weight capacity of a deck in a cargo hold，you would refer to the（）.
The perforated，elevated bottom of the chain locker，which prevents the chains from touching the main locker bottom and allows seepage water to flow to the drains，is called a（）.
The term strake is used in reference to（）.
The opening in the deck that leads the anchor cable outside the hull is the（）.
Owing to the greater girth of a ship amidships than at the ends，certain strakes are dropped as they approach the bow and stern to reduce the amount of plating at the ends. These strakes are called（）.
A single fitting installed in a pipeline that either blanks off the pipe or allows a full flow passage of a liquid through the pipe is referred to as a（）.
Holes in the bulwark，which allow deck water to drain into the sea，are（）.