A.open the indicator cocks
B.supply some LO to cylinder liner wall with lubricator
C.put the fuel handle in the "stop" position
D.pump up the air bottle
您可能感興趣的試卷
你可能感興趣的試題
A.cooling water of the cooling system
B.fuel of the FO system
C.LO of the LO system
D.cooling water of the cooling system and LO of the LO system
A.to reduce heat stress
B.to reduce low temperature corrosion
C.to improve firing and starting performance
D.fuel saving
A.to inspect if the cylinder has the water leakage
B.to expel out the residual water/gas/oil from the cylinder
C.to check if fuel supply is normal
D.A and B
A.the main engine in the stand-by condition
B.auxiliary machinery in the stand-by condition
C.dynamical equipments in the stand-by condition and could be used immediately
D.A and B
A.engine trails should be done after finishing the operation of turning the engine with the turning gear and starting the engine on air briefly
B.in the operation of engine trails, the main engine should be running in low-speed
C.As to the ship equipment with twin main engine, engine trials should be done with one engine ahead and another engine astern at the same time
D.the order “engine trials” should be given by the bridge
最新試題
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
To proceed to the assistance of a ship in distress is()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Using a file without a handle may result in ()
The treatment of the fuel oils involves storage, heating, filtering and()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
The ISPS Code consists of a mandatory section-Part A, which shows()
The condensers located in various stages of a flash evaporator are cooled by()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()