A.stop the LO pump, SW pump, FW pump
B.stop the priming FO transfer pump
C.engage the turning gear
D.open the scavenge air belts drain valve and cover the turbocharger silencer with the dustproof cover
您可能感興趣的試卷
你可能感興趣的試題
A.keep all systems in normally running
B.the main engine is stand-by
C.shut off the starting air bottle outlet valve
D.pay attention to the changes of the system parameters
A.fuel valve
B.the starting air valve
C.the sea chest
D.the main sea pump inlet valve
A.shut off the starting air receiver outlet valve
B.stop the FO priming transfer pump and shut off the correspondence inlet and outlet valve
C.stop the SW pump immediately and shut off the correspondence inlet and outlet valve
D.stop the FW pump immediately and shut off the correspondence inlet and outlet valve
A.overload
B.the odds of the load
C.the default of parts
D.overload and the odds of the load
A.testing for the mechanical load and the thermal load
B.inspecting thermal and mechanical condition of the engine
C.inspecting each system and exhaust temperature
D.testing for compress pressure and explosion pressure
最新試題
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
The shipboard oil pollution emergency plan will be invalid after （）
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
（） is not installed on the main switchboar.
If separating effect is not good, which measure should be taken （）
The condensers located in various stages of a flash evaporator are cooled by（）